|
NATA Laboratory Registration Number: 1589
Facility type: Public Testing Service
Services
Provided
Our Laboratory is accredited by the National Association of Testing
Authorities (NATA) in the field of Non-Destructive Testing and
Mechanical Testing and can issue NATA endorsed test
certificates for the following classes of test:
NATA APPROVED
TEST METHOD
NON-DESTRUCTIVE TESTING (NDT) SERVICES
6.01 Radiographic Examination
of Ferrous Metals.
.01 Welded Joints using X-rays and Y-rays.
.02 Castings using X-rays and Y-rays.
.04 Forgings
6.02 Radiographic Examination of Aluminium
Alloys.
.01 Welded Joints using X-rays.
.02 Castings using X-rays.
6.31 Ultrasonic Examination of Ferrous Metals.
.01 Flat Rolled Products.
.02 Welded Joints -All Types.
.03 Castings.
.04 Forgings.
6.32 Ultrasonic Examination of Aluminium Alloys.
.02 Welded Joints.
.03 Castings
6.51 Ultrasonic Thickness Measurement.
6.61 Magnetic
Particle Testing.
.01 Magnetic Flow with Fluorescent and Non-Fluorescent
Technique.
.02 Current Flow
.03 Coil Method.
6.71 Penetrant Testing.
.01 Water Washable Method -Fluorescent &
Non-Fluorescent.
.02 Solvent Removable -Fluorescent & Non-Fluorescent.
.03 Post Emulsifiable Method
6.81 Electromagnetic Testing
(Eddy Current).
.11 Surface flaw detection using high frequency eddy
current. - Scanning of welds for LPG vessels and welds for gantry,
hydraulic and jib cranes.
.12 Coating thickness measurement.
6.91 Visual
Inspection of Materials.
.01 Rolled Products.
.02 Welded Joints.
.03 Castings.
.04 Forgings
MECHANICAL TESTING SERVICES
13.01 Metals
and Metal Products
.11 Tension Tests on Test Pieces.
.15 Tension Tests on Products.
.21 Brinell Hardness Tests.
.23 Vickers Hardness Tests.
.31 Impacts Tests. Charpy & Izod methods.
.58 Bend Tests
13.03 Welds
and Welded Test Specimens
.11 Tensions Tests.
.21 Vickers Hardness Tests.
.31 Charpy Impact Tests.
.51 Shear Tests.
.58 Bend Tests.
.61 Fillet-break Tests.
.62 Nick-break Tests.
.91 Macro Examination to AS 2205.5.1
13.08 Threaded Fasteners
.11 Tension Tests.
.12 Proof Tests.
OTHER TESTS
PROVIDED
Welding Inspection
and Supervision
Supervision of welder qualification tests,
Supervision of welding procedures
Interpretation of non-destructive testing results
Supervision of testing procedures, and compliance to official
records.
Quality Expediting
Supervision of construction
Contractual requirements
Quality Inspection
METALLURGICAL SERVICES
Failure Analysis and
Investigation
Fractography
Mode of failure determination
Metallography
Metallographic preparation
Microstructural evaluation
Photo-micrographs
On-site replication metallography
Macro-etch examination
Mechanical Testing
Rockwell hardness tests
Tests on wire
On-site hardness testing using Equotip
Material Identification
Chemical Analysis
Coating Inspection
Qualified ACA (Australasian Corrosion Association) Staff
Interpretation of specifications
Coating thickness determination
Routine tests and reporting
Note: The above summary is not a comprehensive list of tests
performed at Metaserv. For enquires on the above tests or any other
testing requirements, please refer to our qualified testing
personal.
Address:
Metaserv Pty Ltd A.B.N. 69 009 574 707
7 Richard St
Western Junction TAS 7212
Telephone: 03 - 6391 8801
Facsimile : 03 - 6391 8831
Mobile : 0409 004 477
A.H : 03 - 6343 4553
Email Address:
Bob@Metaserv.com.au | 