|
Dye Penetrant
Testing
Dye Penetrant crack detection equipment is designed to
detect surface surface cracks or flaws in metallic materials caused
by welding, fatigue, wear and stress. It can be carried out using
portable instruments utilizing fluorescent and non-fluorescent
methods.
Magnetic Particle
Testing.
Magnetic particle crack detection equipment is designed to
detect surface or near surface cracks or flaws in ferrous materials
caused by welding, fatigue, wear and stress. It can be carried out
using either portable or laboratory instruments utilizing
fluorescent and non-fluorescent methods.
|
Lectroflux bench unit is a state of the art magnetic particle
test system for the testing of aircraft components in accordance
with military specifications. The unit features a maximum
magnetising current of 6000 amperes, AC/DC operation and automatic
de-magnetisation.
Applications include the testing of crankshafts, axles and
shafting, connecting rods, mining equipment such as drill rods /
collars and winder components.
|
Magnetic particle
testing
Light Tower Butt Welds.
|
Ultrasonic
Inspection
|
Ultrasonic examination of structural
welds.
|
Ultrasonic techniques are particularly adaptable for determining
the structural integrity of engineering materials.
Their principal applications consist of :
1. Discontinuity detection and sizing.
2. Thickness measurement.
|
|
The desirable features of UT include:
1. High sensitivity permitting detection of minute
discontinuities.
2. Good penetrating power, allowing examination of extremely thick
sections.
3. Accuracy in the measurement of discontinuity position and
estimation of discontinuity size.
4. Need for access to only one surface of test object.
|
|
Test conditions that may limit the application of UT typically
relate to one of the following factors:
|
|
1. Unfavourable test object geometry (size, contour, surface
roughness, complexity and defect orientation.
2. Undesirable internal structure (grain size, structure porosity,
inclusion content or fine dispersed precipitates.
Our ultrasonic inspection service includes the inspection of:
* Weldments
* Castings
* Forgings and rolled produces
* Thickness surveys (up to 600°C)
|
Ultrasonic examination on offshore
drill platform
|
|
An extensive range of ultrasonic transducers, flaw detection
units enable our experienced operators to provide accurate
inspection of your components.
Corrosion and erosion of various equipment Including ships hulls,
storage tanks and pipe lines can be detected via ultrasonic
thickness surveys.
Thickness surveys can be carried out on components operating at
temperatures of -10°C to 600°C.
|
Industrial
Radiography
|
Provides a permanent record of a products compliance to a
relevant a standard.
|
|
Radiography detects defects in ferrous & non-ferrous items
i.e.: aircraft structures castings, butt welding in pressure
vessels pipelines and structural fabrications. Our laboratory can
provide radiographs from multiple source types.These include:
* Iridium 192
* 200kV directional X-ray units
* 300kV panoramic / directional units
* 150 & 300 kV constant potential units
|
Isotope radiography of main cord
splice.
|
|
X-radiography of the Tasmanian
natural gas pipeline.
|
On site processing provide immediate quality assessments of
components and welded joints. This service is provided by two types
of mobile darkrooms. A smaller unit for general jobbing work and a
larger unit for contract work where office facilities are
required.
|
|
Eddy Current
Testing
Locates and measures the severity of surface and near surface
discontinuities in both magnetic and non-magnetic conductive
materials. In addition it can sort both classes of metallic
materials according to such properties as conductivity , chemical
composition and heat treatment.
|
Eddy current test - weld
scan.
|
|
Ultrasonic Thickness
Measurement
The DMS 2 is a revolutionary A-Scan Digital Thickness Gauge. All
pertinent inspection data is displayed to the user on a large high
resolution 1/4 VGA display designed to use direct sunlight to
enhance the contrast.
As well as having all the standard features of digital thickness
meter the DMS 2 extends the test possibilities with the
following.
|
Display of DMS 2: with the actual
thickness at the top and the A-Scan display of the signal
below.
|
A-Scan: Included with the digital readout of the thickness is
the A-Scan representation of the signal in the material, as
pictured to the right. This is beneficial as the operator can
distinguish between paint thickness, the actual thickness of the
part and that of incorrect readings being returned by defects or
reflected sound.
Features using the A-Scan display:
MINIMUM CAPTURE:
Measuring at 32 reading per second, it allows for fast
continuos scanning by recording the minimum thickness
automatically. Which allows the operator to concentrate on the area
to be scanned. Thus making minimum capture ideal for the
interpretation of the areas discovered by Magnetic Flux Leakage
Tests. By scanning 100% of the area marked by MFL the DMS 2 finds
the lowest point and records the result for the operator. When used
in conduction with the alarm (set to the min. thickness allowed)
the actual spot or area is readily marked even with out looking at
the DMS 2
FREEZE locks the A-Scan
display for evaluation and verification of the echoes at any time
during testing even while performing MIN CAP. This helps the
operator understand the results obtained with out the probe in
contact with the job, ideal for high temperature work.
GAIN (The intensity of the
signal) is readily adjustable in 1 dB steps via a direct access
key. Where normal thickness meters have only one setting. The DMS 2
can vary the gain so that results can be achieved where normal
thickness meters fail. I.e. on unparallel sections & uneven
surfaces (pits)
Store/Recall: Up to 20
parameter sets are recordable so that for repeat jobs the DMS 2
set-up and parameters are recorded for easy reloading to save
time.
|
B-Scan (Sample shown): To
quickly identify and picture, a reas of extensive corrosion or
delamination. The DMS 2, B-Scan provides a graphical thickness
cross-sectional view of the equipment being tested. B-Scans are
very helpful in quickly identifying laminated or heavily thinned
areas. Pit size and contour can be easily mapped giving a
representative view of the extent of corrosion pit damage.
|
B-Scan visual display.
|
Data Recorder
Saving Readings = Saving Time
The DMS 2 Data Recorder is designed to be the most comprehensive
data recording tool available. Storing 150,000 readings with A-Scan
or B-Scan graph for easy download and report generation. |
